 |
Arizona Administrative Code (Last Updated: November 17, 2016) |
 |
Title 13. PUBLIC SAFETY |
|
Chapter 10. DEPARTMENT OF PUBLIC SAFETY ALCOHOL TESTING |
|
Article 1. DETERMINATION OF ALCOHOL CONCENTRATION |
EXHIBIT G-2
All data is extracted from pdf, click here to view the pdf.
-
THIS REPORT PREPARED PURSUANT TO DUTY IMPOSED BY A.A.C. R13-10-104(A) ARIZONA DEPARTMENT OF PUBLIC SAFETY
STANDARD QUALITY ASSURANCE PROCEDURES INTOXILYZER MODEL 8000
STANDARD CALIBRATION CHECK PROCEDURE
QA SPECIALIST AGENCY
DATE TIME
INTOXILYZER SERIAL # LOCATION
( ) 1. Ensure that gas tank is attached to instrument and contains a standard alcohol concentration solution AC. OR
Pour a standard alcohol concentration solution AC, into a clean dry simulator and assemble the simulator. Ensure that a tight seal has been made. Turn on the simulator and allow temperature to reach 34° C ± 0.2° C
( ) 2. Intoxilyzer 8000 display reads “PUSH BUTTON TO START”
( ) 3. Go to the “Control Testing Menu”. Select “D” for dry control test or “W” for wet control test. After selection is made press ENTER. ( ) 4. Air blank completed.
( ) 5. Calibration check completed. Test results 0. AC. ( ) 6. Air blank completed.
( ) 7. Remove printed record. Attach the record to the completed checklist.
SIGNATURE