Section R11-1-801. New electrical equipment

Section R11-1-802. Electrical equipment maintenance

Section R11-1-803. Performing electrical work

Section R11-1-804. Removal of “lock on switch” from electric drills or other electrically operated hand rotating tools

Section R11-1-805. Repealed

Section R11-1-807. Electrical equipment properly grounded

Section R11-1-808. Switches and electric controls on electrical equip- ment

Section R11-1-809. Trailing cables of mobile equipment

Section R11-1-810. Trailing cable and power cable connections

Section R11-1-811. Installation of high potential transmission cables

Section R11-1-812. Moving shovel trailing cables

Section R11-1-813. Repealed

Section R11-1-814. Transformer enclosures kept locked

Section R11-1-806. Tag out” necessary prior to work on lines or equipment

Section R11-1-815. Principal power switches shall be labeled

Section R11-1-816. Provisions for shock hazards at switchboards and power control switches

Section R11-1-817. Posting danger signs

Section R11-1-818. Grounding metal buildings, metal fencing and switch gear

Section R11-1-819. Circuits de-energized

Section R11-1-820. Switches and starting boxes

Section R11-1-821. Precautions taken for moving equipment under energized power lines

Section R11-1-822. Power circuits de-energized, switches “locked out”

Section R11-1-823. Hand-held electric tools

Section R11-1-824. Guy wires of poles

Section R11-1-825. Telegraph, telephone or signal wires installed

Section R11-1-826. Electrical connections and resistor grids guarded

Section R11-1-827. Continuity and resistance of grounding systems tested

Section R11-1-828. Inspection and cover plates

Section R11-1-829. Reserved

Section R11-1-830. Reserved

Section R11-1-831. Protection against short circuits and lightning

Section R11-1-832. Guarding and de-energizing lines from metallic tools or equipment

Section R11-1-833. Separating and insulating power lines from water lines, etc.

Section R11-1-834. Transformers -- enclosed, 8 ft. above ground, or otherwise protected

Section R11-1-835. Handling energized shovel or drill power cable