Section R11-1-1101. Construction of headframes and material used

Section R11-1-1102. Design of headframes

Section R11-1-1103. Headframes constructed of flammable material

Section R11-1-1104. The sheave wheel platform and stairway

Section R11-1-1105. Reserved

Section R11-1-1106. Maintenance of information contained in Rope Record Book for friction hoists

Section R11-1-1107. Safety factors for friction hoist ropes, tail ropes, and guide and rubbing ropes

Section R11-1-1108. Use of hoisting rope, tail rope, guide or rubbing rope on friction hoist

Section R11-1-1109. Drum diameter of friction hoist

Section R11-1-1110. Design of friction hoist drives, controls, and brakes

Section R11-1-1111. Inspection of friction hoist rope treads

Section R11-1-1112. Installation of tapered guides or other approved installations on friction hoists

Section R11-1-1113. Emergency stopping device for friction hoists

Section R11-1-1114. Emergency stopping device provided for friction hoists when tail rope is used

Section R11-1-1115. Means provided to adjust depth indicator on fric- tion hoist

Section R11-1-1116. Level of water and spillage in shaft sump when friction hoist used

Section R11-1-1117. Positions of hoisting ropes within clamps, for fric- tion hoists, examined

Section R11-1-1118. Manufacturer shall provide certificate giving maximum rated unbalanced load and maximum rated sus- pended load for friction hoist

Section R11-1-1119. Alterations of friction hoist capacity prohibited

Section R11-1-1120. Determination of maximum material load allowed on conveyance of friction hoist

Section R11-1-1121. Inspection of shafts used for hoisting or lowering men

Section R11-1-1122. Protection from falling ground

Section R11-1-1123. Repealed

Section R11-1-1124. Platform suspended by wire ropes in shaft sink- ing

Section R11-1-1125. Rope guides

Section R11-1-1126. Substantial platforms required for shaft inspec- tion and repair work

Section R11-1-1127. Use of crane in shaft sinking operations

Section R11-1-1128. Reserved

Section R11-1-1129. Reserved

Section R11-1-1130. Reserved

Section R11-1-1131. Mine hoist drives

Section R11-1-1132. Rated capacities of hoists

Section R11-1-1133. Automatic hoists

Section R11-1-1134. Flanges on drums

Section R11-1-1135. Maximum fleet angle

Section R11-1-1136. Brakes on man hoists

Section R11-1-1137. Lock mechanism on hoists to prevent accidental clutch withdrawal

Section R11-1-1138. Devices for man hoists to prevent overtravel

Section R11-1-1139. Indicator of cage, skip bucket or cars

Section R11-1-1140. Placement of hoist controls

Section R11-1-1141. Physical examination for hoisting engineers and trainees

Section R11-1-1142. Hoisting engineer’s duties while hoist in motion

Section R11-1-1143. Due caution while hoist in motion

Section R11-1-1144. Hoisting engineer report all defects

Section R11-1-1145. Hoisting engineer must understand signal

Section R11-1-1146. If hoist down for eight hours

Section R11-1-1147. Hoisting engineer qualifications

Section R11-1-1148. Experienced hoistmen shall operate hoist

Section R11-1-1149. Hoisting engineer shall familiarize himself with all signals

Section R11-1-1150. Notification to hoisting engineer when men are working in compartment

Section R11-1-1151. Renumbered

Section R11-1-1152. Hoist ropes inspected

Section R11-1-1156. Attaching the rope to the load

Section R11-1-1153. Discarding of wire cable or rope used for hoisting

Section R11-1-1154. Splicing wire cable or hoisting rope

Section R11-1-1155. Static-load safety factors for selecting ropes for hoisting men

Section R11-1-1157. Inspection of materials

Section R11-1-1158. Use of emergency chains

Section R11-1-1159. Signal by the cager

Section R11-1-1160. Cagers shall report all defects

Section R11-1-1161. Getting on cages

Section R11-1-1162. After signal given to move cage

Section R11-1-1163. Signal to move cage

Section R11-1-1164. Use of metal bonnet

Section R11-1-1165. Providing means for blocking cars when hoisted

Section R11-1-1166. Reporting materials or tools dropped in shaft

Section R11-1-1167. Hoisting materials or tools

Section R11-1-1168. Testing of safety devices

Section R11-1-1169. Smoking on conveyance used to lower or hoist men, ore or equipment

Section R11-1-1170. No open hooks used to hoist

Section R11-1-1171. Use of buckets to hoist men

Section R11-1-1172. Buckets to hoist men during shaft sinking

Section R11-1-1173. Lowering of conveyances

Section R11-1-1174. Hoisting materials and men in same shaft

Section R11-1-1175. Lowering and hoisting buckets

Section R11-1-1176. Approved methods of signaling

Section R11-1-1177. Gates for shaft landings

Section R11-1-1178. Stop blocks

Section R11-1-1179. Getting on or off moving cage

Section R11-1-1180. Method provided to signal hoist operator from cage

Section R11-1-1181. Reserved

Section R11-1-1182. Diesel or fuel-injection engine used to power hoist

Section R11-1-1183. Renumbered

Section R11-1-1184. Cable secured to hoist drum

Section R11-1-1185. Location of hoisting signal devices during shaft sinking

Section R11-1-1186. Construction of loading pockets

Section R11-1-1187. Reserved

Section R11-1-1188. Reserved

Section R11-1-1189. Reserved

Section R11-1-1190. Elevator inspection