Section R4-34-802. General Installation

A.      An installer or contractor shall affix and complete an Arizona Insignia of Approval to each manufactured home, mobile home, or single-family factory-built building at the tail-light

end of each unit, approximately one foot up from the floor and one foot in from the road side. “Road side” means the right side of the unit when viewing the unit from the hitch. The installer or contractor shall affix the insignia before calling the Office for an inspection.

B.       An installer or contractor shall make a report by the 15th of each month regarding compliance with subsection (A).

C.      An installer or contractor shall check with local jurisdictions for frost line requirements governing permanent foundations or utilities.

D.      An installer or contractor shall install multi-sectional manufac- tured homes manufactured after June 30, 1977, according to the manufacturer’s instructions for joining the sections, mak- ing utility cross-over connections, and providing center (mar- riage) line and perimeter supports if the instructions are consistent with this Chapter.

Historical Note

Adopted effective January 31, 1979 (Supp. 79-1). Amended subsections (A), (D), (F), and (L) effective October 20, 1981 (Supp. 81-5).Former Section R4-34- 802 repealed, new Section R4-34-802 renumbered from R4-34-502 and amended effective July 3, 1991 (Supp. 91-1). Section repealed by final rulemaking at 6 A.A.R. 47, effective December 8, 1999; new Section adopted by

final rulemaking at 6 A.A.R. 145, effective December 8,

1999 (Supp. 99-4).