![]() |
Arizona Administrative Code (Last Updated: November 17, 2016) |
![]() |
Title 18. ENVIRONMENTAL QUALITY |
![]() |
Chapter 9. DEPARTMENT OF ENVIRONMENTAL QUALITY |
![]() |
Article 3. AQUIFER PROTECTION PERMITS - GENERAL PERMITS |
![]() |
Part A. GENERAL PROVISIONS |
Section R18-9-A302. Point of Compliance
All data is extracted from pdf, click here to view the pdf.
-
The point of compliance is the point at which compliance with Aquifer Water Quality Standards is determined.
1. Except as provided in this Section or as stated in a spe- cific general permit, the applicable point of compliance at a facility operating under a general permit is a vertical
plane downgradient of the facility that extends through the uppermost aquifers underlying that facility.
2. The point of compliance is the limit of the pollutant man- agement area.
a. The pollutant management area is the horizontal plane of the area on which pollutants are or will be placed.
b. If a facility operating under a general permit is located within a larger pollutant management area established under an individual permit issued to the same person, the point of compliance is the applica- ble point of compliance established in the individual permit.
Historical Note
New Section adopted by final rulemaking at 7 A.A.R.
235, effective January 1, 2001 (Supp. 00-4).