Section R11-1-404. Airborne contaminants  


Latest version.

All data is extracted from pdf, click here to view the pdf.

  • Except as permitted by R11-1-406:

    1.        Except as provided in subsection (2) the exposure to air- borne contaminants shall not exceed, on the basis of a time-weighted average, the threshold limit values adopted by the American Conference of Governmental Industrial Hygienists. Excursions above the listed thresh- olds shall not be of a greater magnitude than is character- ized as permissible by the conference.

    2.        Employees shall be withdrawn from areas where there is present an airborne contaminant given a “C” designation by the conference and the concentration exceeds the threshold limit value listed for that contaminant.

    3.        The eight-hour time weighted average airborne concen- tration of asbestos dust to which employees are exposed shall not exceed two fibers per millimeter greater than 5 microns in length, as determined by the membrane filter method at 400-450 magnification (4 millimeter objective) phase contrast illumination. No employee shall be exposed at any time to airborne concentrations of asbes- tos fibers in excess of 10 fibers longer than 5 microme- ters, per milliliter of air as determined by the membrane filter method over a minimum sampling time of 15 min- utes. “Asbestos” is a generic term for a number of hydrated silicates that, when crushed or processed, sepa- rate into flexible fibers made of fibrils. Although there are many asbestos minerals, the term “asbestos” as used herein is limited to the following minerals: Chrysolite, Amosite, Crociodolite, Anthophylite, Tremolite, and Act- inolite.

Historical Note

Former Rule 4:04; Amended effective April 7, 1976

(Supp. 76-2). Amended effective August 18, 1980 (Supp.

80-4).